TSP LT1 Stage 2 V2 Camshaft

TSP 6.2L LT1 Stage 2 V2 Camshaft 227/242 .646"/.631" 112 LSA, 109.5 ICL w/ +32% Fuel Lobe The Texas Speed & Performance LT1 Stage 2 V2 camshaft is a great choice for the enthusiast looking for an additional jump in horsepower. It will have a nice chop at idle and will require a higher stall speed torque converter for automatics. It does not retain the factory AFM/DOD functionality that deactivates cylinders, so a DOD/AFM delete kit will be needed. We recommend that the VVT be locked out by means of a phaser lockout kit for all of our TSP LT camshafts. All LT V2 camshafts will come standard with our +32% fuel lobe. The +32% fuel lobe will require the use of a lash cap, so please make sure that you install one during the camshaft installation! (Do not use lash cap with LT4 fuel pump) Engines best suited for: LT1 6.2L Desired Compression ratio for cam: Stock Recommended Springs Required: Manton conical valve springs or TSP dual .660 spring kit Aftermarket Stall Converter Required: 2600-2800+ RPM stall recommended Upgraded Rear Gear Required: No Operating RPM Range: 2600-6800 Power Increase: 95hp and 18ft/lbs (Gains) 586HP/523TQ (Total) Drivability: Good drivability with a decent chop at idle! Phaser Lockout Required: Yes