TSP 418 C.I.D. LS3/L99/LSA Long-Block

All Texas Speed & Performance 418 C.I.D. short-blocks use a new GM L92/LS3 aluminum block! The standard price includes a fully-assembled GM L92/LS3 short-block with a 4.00" stroke crankshaft with your choice of 24X or 58X reluctor wheel. The standard price also includes your choice of Wiseco, CP PistonsDiamond Racing, or Mahle pistons. All piston sets listed are 2618 forgings and feature lowered ring lands to accommodate nitrous and boost applications, should the customer choose to use them. Any TSP 418 L92/LS3 will use a 4.070" or 4.080" bore piston set, unless otherwise noted. Custom builds are available. We offer multiple brands of connecting rods and crankshafts to suit any type of application. Every engine will come standard with the necessary oil and coolant plugs already installed in the block. We do offer an optional conversion package that will include the LS2 timing cover with camshaft position sensor, LS2 valley cover, LS2 lifter trays, LS2-specific 1x timing set, and plug-n-play harness extensions for the camshaft position and knock sensor harnesses. This will be required if you are installing the engine into an LS1 vehicle. Feel free to give us a call, and we will be more than happy to put an itemized estimate together for you! We also offer additional discounts if you pay via a cashier's check or wire transfer. All engines will ship via truck freight, so if are purchasing online the shipping costs listed will NOT be correct! We will contact you with a shipping cost after your order has been placed. All prices listed do not include the applicable shipping costs! Our TSP 418 L92/LS3 C.I.D. long-block includes everything in our short-block package plus the following parts that are installed on the engine: Precision Race Components (PRC) As-Cast 225cc Cathedral Port Cylinder Heads with TSP Dual Valve Spring Kit Your Choice of TSP Camshaft LS2 or LS3-Specific Timing Set Johnson 2110R Lifters TSP Hardened Chromemoly Pushrods GM Cylinder Head Bolts & GM MLS Head Gaskets TSP Ported LS6 or L99 Oil Pump Bolts, Gaskets, & Other GM Items Included: LS2 Lifter Trays with Bolts, Camshaft Retainer Plate with Bolts, Rear Main Seal Housing Gasket, Timing Cover Gasket, LS2 Valley Cover Gasket, Oil Pump O-Ring, GM Balancer Pulley Bolt, Oil Pan Gasket, Water Pump Gaskets, Rear Main Seal, Front Crankshaft Seal, Cylinder Head Dowel Pins We also offer turn-key long-blocks that will include your choice of oil pan, intake manifold, throttle body, etc. We do offer many upgrades to customize your engine, such as ARP bolts and studs, Cometic head gaskets, etc. Please give us a call, and we will be happy to put an itemized estimate together for you. We also offer an expedite service to be able to have your engine built and ready to ship in as little as five business days! The build time will vary according to parts availability. Give us a call for more information! All TSP engines will include two oil changes worth of Driven Racing break-in oil for no additional cost. Proper break-in oil and procedures for your engine are just as important as the build process! The Driven Racing break-in oil allows for proper ring sealing against the cylinder walls upon start-up, as well as for the break-in period once the engine is up and running. Most off-the-shelf engine oils do not have the necessary ZDDP additives to allow for proper break-in of a new engine, and we want to take every precaution possible to ensure that your new TSP engine receives a proper break-in! We also offer the Driven Racing oil for your new engine once your break-in is complete. We recommend using either the HR2 conventional non-synthetic or the LS30 full synthetic oil. Please note that the Driven Racing LS30 is the ONLY synthetic oil we recommend using in your engine because it retains the necessary ZDDP additives.