My Cart
Vehicle: 1971 Chevy Nova (#Blueballs)
Engine: Texas Speed Iron Block Gen IV engine bored to 377-cubic inches Xtreme CFM rectangular port heads.
Camshaft: Lil' Johns Stage 2 Blower cam
Power Adder: LSA Blower ported by Xtreme CFM.
Transmission: TH400 Reverse Manual Valve Body
Rear End: Ford 9 inch with Strange carrier, spool and 3.23 gears.
Suspension: Front and Rear Coil over suspension with rear ladder bar and track locator. 6 point cage.
Project Blueballs is a 1971 Nova which is owned by Joe Vezzosi (father of PSI co-owner Jon Vezzosi). The car was originally bought by Jon Vezzosi in 1996 and it has been in the Vezzosi family since. Originalliy a 6 cylinder powerglide car, it has scene numerous engine swaps over the years while being raced periodically. The current incarnation is meant to be drag raced but also driven to local cruise nights and car shows. All work on the latest build has been done by Jon’s close friend Tom Flitcroft in Phenix City, AL.
You can check for regular updates on project #blueballs through PSI facebook (facebook.com/psiconversion) and Instagram (instagram.com/psiconversion) pages. The engine and transmission swap were completed in December 2019 and after some tweaks on the dyno, made 699-RWHP. Following our dyno outing, the car was brought to the track for some shakedown runs, which resulted in the Chrysler 8-3/4 rear axle housing being bent like a pretzel.As of Febuary 2020, a new custom Ford 9-inch rear with strange axles and center section are going in the car. Estimated completion is March 2020. Stay tuned for updates.
About
Looking for an Affordable, In Stock, Plug and Play wiring harness for your LS Swap? PSI sells Standalone Wiring Harnesses for GM Gen II, III, IV, & V LS/LT based engines and transmissions. These harnesses include the Gen II LT1/LT4, Gen III (24x) LS1/LS6 and Vortec Truck Engines as well as Gen IV (58x) LS2, LS3, LS7, & Vortec and GEN V LT / ECOTEC3 Engines. All PSI Harnesses are Made in the USA. In addition to wiring harnesses, PSI carries Holley Products, Vintage Air A/C, Dakota Digital Gauges, HPTuners and PCM programming, Fuel Pump Kits, Engine Sensors, Extension Harnesses, Replacement GM connector pigtails and a complete line of hardware to complete your conversion needs!
My Account
Contacts
2029 Route 88
Brick, NJ 08724
ph. 732-276-8589 Mon-Fri: 8:00am to 6:00pm ET
customerservice@psiconversion.com
sales@psiconversion.com
techsupport@psiconversion.com